396
York Throttle Cable Sets
Throttle/Idle Cables
36-0128
36-0131
Clear Coated Throttle/Idle Cable Set
VT No.
Length Over Application
36-0855 38”
Stock 1981-99 FX-XL-FL
36-0868 46”
+8”
1981-99 FX-XL-FL
36-0856 34”
Stock 1990-95 90 FXST/FLST, 90-95 FXSTC/FLSTC/FLSTF,
1995 FXSTSB, 93-95 FLSTN, 91 FXDB, 90-94 FXLR/FXR, 90-92 FXRS/FXRT, 90-93 FXRS-
Conv. FXRS S.E.
36-0866 36”
+8”
1990-95 90 FXST/FLST, 90-95 FXSTC/FLSTC/FLSTF,
1995 FXSTSB, 93-95 FLSTN, 91 FXDB, 90-94 FXLR/FXR, 90-92 FXRS/FXRT, 90-93 FXRS-
Conv. FXRS S.E.
36-0857 34.25”
Stock 1996-17 FXD, 02-17 FXDI, 99-17 FXDX, 02-17 FXDXI, 01-17 FXDXT, 96-17 FXDL, 01-17 FXDLI,
96-17 FXDS Conv., 96-17 FXDWG, 01-17 FXDWGI, 96-up FXST, FLST, 96-up FLT
36-0128 42.25”
+8”
1996-17 FXD, 02-17 FXDI, 99-17 FXDX, 02-17 FXDXI, 01-17 FXDXT, 96-17 FXDL, 01-17 FXDLI,
96-17 FXDS Conv., 96-17 FXDWG, 01-17 FXDWGI, 96-up FXST, FLST, 96-up FLT
36-0119 47”
1996-up FXST, FLST, 1996-17 FXD, 1996-07 FLT
36-0131 52”
+12”
1996-17 FXD, 02-17 FXDI, 99-17 FXDX, 02-17 FXDXI, 01-17 FXDXT, 96-17 FXDL, 01-17 FXDLI,
96-17 FXDS Conv., 96-17 FXDWG, 01-17 FXDWGI, 1996-up FXST, FLST, 1996-up FLT
For Models with S&S Super "E" or "G" Carb
36-0114 42”
1982-95 FX-FXST-FLST
36-0115 54”
1982-95 FXST-FLST
36-0129 38”
1996-up FXST-FLST
36-0135 44”
1996-up FXST-FLST-FXD
Big Twin Throttle/Idle Cables are available in black vinyl or
braided stainless covering with correct end fitting for each appli-
cation, also available in over stock length. Assemblies unless
noted.
V-Twin
Stainless
V-Twin
Black
OEM
Fits
36-0903
36-0101
56324-81 Stock 1981-89 FX-FLH-
FXST-FLST Throttle
36-0902
36-0100
56323-81 As Above, Stock Idle
36-0902
36-0101
Internal Throttle/Clutch Unit features
ball and needle bearing construction
with built in return spring.
VT No. Type Item
36-0789 Clutch Assembly
36-0591 Bearing ³⁄₈ x ⁷⁄₈ x ⁹⁄₃₂
Black Matched Stock and Idle Cable Sets for Big Twin
include correct throttle and idle cable assembly.
Stock +8”
+12” Years Model
36-0858 36-0861 —
1996-up Softail, FXD, FLT
36-0859 36-0862 —
1990-95 Softail, FXD, FLT
36-0860 36-0863 36-2561 1981-89 Softail, FLH
36-0858
36-2561
1. Cut 2³⁄₈” off end of handlebar. Remove end of throttle handle that would attach to throttle
cables.
2. Mark handlebar for inner throttle sleeve. Drill a hole for the set screw, this will hold throttle
on the handlebar.
3. Remove set screw from the outer sleeve of spiral. Slide grip on and mark end of grip on
the handlebar. Measure from this mark back to set screw in outer sleeve. This measurement
will be used to mark and drill the throttle grip. Once drilled install grip. Use a small amount of
Loctite® on set screw for final installation.
4.
Note: Set Screw (A) should not be tightened so as to make contact with handlebar as it
will prevent throttle from turning.
Internal Throttle
Wyatt Internal Throttle
Sleeve. Custom design
allows pull action of throt-
tle cable for use with billet
grips.
VT No. 36-0570
36-0789
Twist Grip Kit with cables features the push-pull type for
Keihin butterfly and CV type carburetors. Includes 2 stock
length black cables and twist throttle and grip set.
VT No.
Year
Models
35-0276 1981-89 FX-XL
35-0278 1990-96 FX-FL-XL
35-0277 1996-04 FX-XL
35-0276
35-0278