556
Rear Sprocket
19-0041
19-0124
19-0121
19-0042
19-0043
Chrome Sprockets have a 6 mm offset.
VT No.
Teeth
19-0043 51
Flat Sprockets
19-0120 48
19-0124 49
19-0121 51
Chrome Lazer Design Rear
Sprockets with 9.8mm offset for
1973-84 FX-FL or flat.
Offset Flat Teeth
19-0130 19-0133 49
19-0134 51
Chrome 5-Spoke Sprockets. Offset models have 9.8mm off-
set.
Offset Flat
Teeth
1973-99
19-0672 19-0674 48
19-0673 19-0675 51
19-0673
19-0672
9.8mm
Offset
6 mm
Offset
1973-84 Big Twin, 1979-81 XL Rear Sprockets. Replace
OEM 41470-73. Used on all 1973-86 FX, FXE, FXEF, FXWG,
FXST, FL and FLH, 1979-81 Classic, cast or wire wheel. Dish
type sprocket with 9.8 mm offset.
Zinc Chrome Teeth
—
19-0047 43
—
19-0032 45
19-0048 —
46
—
19-0037 48
—
19-0039 49
19-0040 19-0041 51
1982-84 FXR with chrome finish. 16mm offset.
VT No. OEM
Teeth
19-0020
46
19-0021 40954-81 48
19-0022 40954-83 51
Offset is measured from
bolt hole surface to center
line of teeth.
Note: Sprocket offset
measured from bolt
mount surface to center
of teeth.
9.8mm
Offset
Complete Dowel Pin Sets are for each
specific application.
VT No. Year
Fitment
19-0110 1930-59 Mechanical and Hyd. Kit
19-0115 1935-52 45 Solo Kit
19-0113 1967-72 Hydraulic Kit
19-0110
Pulley Spacers provide offset when required, with ⁷⁄₁₆” bolt
holes. Each disc measures 2¹⁄₁₆” inner diameter with 4⁵⁄₁₆” out-
side diameter. For 1980-99.
VT No.
Thick Material
23-0320* ¹⁄₁₆” Steel
19-0128 ³⁄₁₆” Steel
19-0452 ³⁄₁₆” Billet
19-0413 ¹⁄₄” Steel
19-0414 ⁵⁄₁₆” Steel
*Note: Use when installing flat rotor on 1973-75 Big Twin.
Rear Sprocket Kits replacements for
brake drums with rivet on sprockets.
Includes rivet and dowels.
VT No. OEM
Teeth Years
Model
19-0012 41470-30 51 1930-57 Rigid Big Twin
except 1936 OHV
19-0015 41420-30
Dust Ring Rigid Big Twin Zinc
19-0408 As Above
Dust Ring Rigid Big Twin Raw
19-0000 Kit
51 1930-57 Big Twin with ring
19-0001 41470-58 51 1958-61 Big Twin
19-0002 41470-62 51 1962-66 Big Twin
19-0003 41470-67 51 1967-72 Big Twin
*Note: Order dust ring separately.
19-0012
Rivet Set will cap head
of solid steel rivets for ³⁄₈
round head size.
VT No.
16-0709 Tool
16-0337 Set, Parkerized
16-0337
1980-99
19-0414