818
Hummer Parts fit 1947-65 Model 125 and 165.
VT No.
OEM
Item
Fits
32-8092 70322-55 Wire Harness
Magneto
32-8093 70332-53 Wire Harness
Battery
32-0058 29580-55 Points 1955-up Magneto
28-2134 50940-55 Peg rubbers
All Driver
8310 CAD —
Hardware kit
Both Engine
9215-2
702
Oil Fill Plug
All Engine
Drain Plug, Pair
49-2545 68040-55 Taillight Bracket
27-1709 50006-52 Kick Stand
All, Zinc
13-0174 50001-49 Kick Stand Spring All, Black
23-0327 42256-47 Brake Rod
1947-62
23-0328 42256-63 Brake Rod
1963-up
Spare Parts Books.
VT No.
Year
48-0981 1948-55
48-0982 1956-65
K-Model Valve Cover Sets
for 1952-56 KH + K-Model.
Replaces 18239-54 and
18255-52A.8 pc. Set, zinc
VT No. Item
11-0911 Set
3057-4 Lower Only
1952-56
K-Model Gasket
Kit does not
include head
gaskets as none
are used on
K-Models.
VT No. 15-0699
Crank Pins made of 8620 steel.
Model Years OEM
Jims Eastern
3 Hole 3 Hole
K Model 1952-53 23960-52
10-0132 10-8371
KR-XR 1½” All
23960-55R —
10-0383
Truett and Osborn
Flywheel Sets fea-
ture original weight
right and left sides.
Fits 1952-56 K
models.
Bare Flywheels
Only
VT No. 10-1068
Steel Valve Collars.
VT No.
OEM
Use
Year
Model
11-0660 18220-30 Upper 1930-73 45 SV +K
11-0812 18165-41 Collar 1954-56 K-Model
11-0813 18223-53 Spacer 1952-53 K-Model
V-Twin Piston Kits include 2 Cast Alloy Pistons,
1-Piece Ring Set, 2 Wrist Pins and 4 Circlips. Rings
also available separately.
Flathead
K-Model Side Valve
Size
2.745 Bore
Rings
Standard
11-0438
.010
11-0431
11-2530
.020
11-0432
11-2523
.030
11-0433
11-2532
.040
11-0434
.050
11-0435
11-2534
.060
11-0436
11-2535
.070
11-0437
Wrist Pin
11-0869 each
Head Bolts Kits.
Cad
Chrome Fits
9641-16 9640-16 1952-57K-KR-KK
9643-16 9642-16 1954-56 KH
Valve Springs.
VT No.
OEM
Year
Model
13-0221
18201-52
1952-53 K Model
13-0222
18200-32
1953-56 KH Model
Primary Chain
19-0363
35 X 3 -92
1952-56 K Model
.005 Oversize Pinion Right Side
Case Race fits 1954-56 K-KH
Replaces 24585-54.
VT No. 10-0276
K-Model Valve Spring Kits
include springs collars and
keepers.
VT No. Year
13-9205 1952-53
13-9206 1954-56
K-Model Motor Parts
H-3 Battery features black construction as original
replaces 66001-47.
VT No. 53-0520
Note: Do not
over fill, fill to
cover top of
plates only as
per instructions
provided. This
battery vents
through the
caps. There is
No Warranty on
Leakage due to
over filling.
Hummer Replica Header Sets. Muffler sold separately.
VT No. OEM
Item/Type
31-0227 65290-51 Clamp 51-62
31-0308 65523-57 Front Muffler Clamp Stainless Steel
Hummer Solo Seat features steel ribbed baseplate
with nose bracket. Genuine black leather construction
replaces 52001-50. Measuring 13.5 x 13.5. Order
springs separately.
VT No. Item
47-0116 Seat
13-9252 Springs
31-0974 Nose Bracket
Hummer Tail Lamp is a
replica version of a tail lamp
with bullet hood and glass
lens. Mounts to fender and
includes license plate mount
slots. Replaces 68001-47.
VT No.
Item
33-2160
Chrome
33-2152 Black
Hummer Petcock replaces 62125-50, die
cast with threaded end for line.
VT No. OEM
Item
Year
35-0650 62125-50 Petcock 1950-58
49-0187 62358-50 Gas Line 1953-58
Hummer Parts
1952-56 K-Model Guides. Use the same
guide on intake or exhaust.
VT No.
Size
11-0792
Standard
11-0822 +.002
11-0823 +.004
13-0221
13-0222
XLH and K Oil Lines are cadmium plated, includes
nuts and seals.
VT No.
OEM
Item
40-1262 63507-52 Return Line 1952-55
40-1258 63507-56B Return Line 1956-64
40-1263 63570-52A Vent Line 1952-55
40-1259 63570-56A Vent Line1956-64
40-1258
31-0974
13-9252
Header Pipes
VT No.
Finish
Type
Fits
Year
30-0180
Chrome Drag
K/KH
1952-56
30-1288
Raw Drag K/KH 1952-56
30-1083
Chrome
2:1
K
1952-53
30-1082
Chrome
2:1
KH
1954-56
32-0058
30-1083
30-1288
47-0116
30-3194
30-1082
30-0180