976
Bendix Carb Kit
Bendix Carburetor Kit fits 1957-85 XL. Kit includes 38mm
Bendix Carburetor with adjustable main jet, throttle handle
with grips, cable and cable bracket and 7” round logo air
cleaner with support. Kit includes seal adapters to use on pre-
1978 O-Ring heads.
VT No. 35-0118
Bendix Carburetor Replacement Parts.
VT No.
OEM
Item
Brand/Finish
35-0507 27630-71 Float
Facet
35-4577 27645-71 38mm Float bowl
Facet, Plain
35-9250 —
40mm Float bowl
Facet, Plain
15-0147 27646-71 Bowl gasket
10 pack
35-0203 27762-71A Pump
V-Twin
35-9132 27389-71 Pump boot
Accel
13-9242 27659-71 Float Pin Spring
10 pack
35-0424 —
Float Needle
38mm
35-0425 —
Float Needle
40mm
35-0533 —
Idle Jet Tube
12-2557 —
Throttle Stop Screw with Spring
13-9223 27613-71 Throttle Stop Screw Spring
35-0203
15-0147
Adjustable Main Jet Conversion Kit fits all
Bendix carburetors.
VT No.
Item
35-0202 Jet Kit
16-0865 Jet Tap ⁹⁄₃₂” x 32, Some early carbu-
retors require drilling and tapping for jet installa-
tion.
Bendix Carburetor has 38mm Venturi and 42mm throat.
Complete with choke, accelerator pump, and built-in return
spring. This complete unit bolts onto all Big Twins from 1971-
75 as stock replacement.
VT No. MM Type
Cable Finish
35-0021 38 Fixed
Single Cast
35-0060 38 Adjustable Single Cast
35-0021
Bendix Main Jets.
VT No.
OEM Size
35-9143
27651-75
.095
35-9144
27652 75
1.00
35-9145
27653-75
1.05
35-0198
27654-75
1.10
35-9146 27655-75
1.15
35-9147
27656-75
1.20
14-0520 O-Ring 10 pack
Idle Adjusting Screw allows the
ease of adjustment with the “T” han-
dle design. A single idle “T” screw is
available for Bendix. Stainless steel.
VT No. 35-0221
Carburetor Mount Stud Sets.
VT No. OEM
Years
Size
12-2099 33298-65 1965-77 ⁵⁄₁₆ - 1¹⁄₂
12-2126 24824-67 1967-70 ³⁄₈ - 2
12-2110 29254-78 1978-89 ⁵⁄₁₆ -1¹⁄₄
35-0060
Dell’Orto Spigot Carburetor Adapter has
O-Ring seal with steel flange for 38 mm carbu-
retors.
VT No. 35-9076
Dell’Orto Pumper Air Cleaner Flat Adapter
allows use of Bendix air cleaners.
VT No. 34-1060
Dell’Orto
35-0201
35-4570
Bendix Repair Kit includes
accelerator-pump for all 38 and
40mm, stock or adjustable jet
carburetors. Replaces 27132-
71.
VT No. MM Brand
35-4570 38 Facet
35-0201 38 V-Twin
35-9164 40 Facet
35-9164
Important Note:
Some items on this page may be emission-related parts subject to California or other emission control laws. Please
see for important information regarding emission control regulatory compliance and warranty information.
Dell’Orto Pumper features adjustable accelerator pump and
choke. Kit includes throttle assembly, cable, grips, air cleaner
adapter and carburetor adapter to fit stock two bolt XL mani-
folds on pre1985 models.
VT No. Item
35-0030 38mm Complete Kit
35-0031 40mm Complete Kit
36-2550 Replacement Throttle Cable for 38 & 40mm
35-0238 38mm Carburetor Only
35-0239 40mm Carburetor Only
36-2550
35-0238