electronic component in 1962. All early devices emitted low-intensity read lights but modern LED’s are available across the
ultraviolet and infrared wavelengths with very high brightness.
ture. Many of the LEDs produced in the 1970s and 1980s are still in service today. Typical life times quoted are 25000 to
1000000 hour, but heat and current settings can extend or shorten this time significantly.
VT No. Description
33-1378 Dual filament, amber
33-1266 Dual filament, red
33-1377 Single filament, amber
33-1379 Single filament, red
33-1380 Single filament, white
33-1382 Dual filament, amber/white
33-1384 Dual filament, red/white
33-1381 Single filament, amber/white
33-1383 Single filament, red/white
33-1291 Single filament, clear
33-1922 Single filament, red
33-1923 Single filament, amber
VT No. Description
33-1386 Dual filament, amber
33-1268 Dual filament, red
33-1269 Dual filament, white
33-1385 Single filament, amber
33-1387 Single filament, red
33-1388 Single filament, white
33-1390 Dual filament, amber/white
33-1392 Dual filament, red/white
33-1389 Single filament, amber/white
33-1391 Single filament, red/white
VT No. Description
33-1351 Dual filament, amber
33-1353 Dual filament, red
33-1355 Dual filament, white
33-1350 Single filament, amber
33-1352 Single filament, red
33-1354 Single filament, white
VT No. Description
33-1357 Dual filament, amber
33-1359 Dual filament, red
33-1361 Dual filament, white
33-1356 Single filament, amber
33-1358 Single filament, red
33-1360 Single filament, white
SMD Stands for Surface Mounted Device. An electrical component that is usually mounted on the surface of a cir-
cuit board. Advanced technology has made these components smaller and smaller. Manufacturers are now making
SMD LED’s (Light Emitting Diodes). These incredible small SMD LED’s are extremely bright and allow for more
light in a compact bulb. Replace an old conventional bulb with these super bright, extended life, low energy bulbs.
VT No.
33-1589
replaces 1156 bulb
These lights can be seen from much greater angle by other vehicles
and drivers on the road. This makes them much more effective when
traveling close to the other driver’s “blind spot”. It is NOT necessary to
be directly in front, or get behind a bike equipped with these wide view
LED lights to be seen.
ring of LEDs. When you light them up, they gradually go to full power
creating a nice fade effect.