10-5160 TC-88 Camshaft Kits
10-5177 10-4276
S&S TC-88 Gear Drive Cams and Camshaft Kits increases valve timing accuracy by eliminating timing chain lash and also reverses the rear cams direction of
rotation providing additional operating clearance between cam lobes that will allow higher cam lifts.
Complete Cam Kits include cams, complete gear drive kit and cam installation kit.
Gear Drive Cams can only be used with gear drive kit and also must be used with adjustable pushrods and performance valve spring kit.
Cams only include inner gears. Outer cam drive gear kit must be ordered separately. Material must be removed from the inner surface of the stock gear cover and
crank case modification is required on .625” and .640 lift cams.
00-05 Dyna
00-06 Big Twins
  06-up Dyna
07-up Big Twins
    Valve
Timing  
 Valve
Duration
 

  Lift@ TD



Cams
Only
Price Complete
Cam Kits
Price cams
Only
Price Complete
Cam Kit
Price Series
(see
Note*)

Open /
Close
Intake

Open
/Close
Exhaust
Valve
Lift
Intake


Exhaust
Centerline

Intake


Exhaust


Intake


Exhaust

10-5160

$569.00

10-5177

$675.00

10-5246

$569.00

10-5266

$868.00 510G1 20°/38° 52°/20° 238° 252° 510” 99° 106° 187” .178”

10-5166

$569.00

10-5178

$837.00

10-5247

$569.00

10-5267

$868.00 570G2 20°/40° 55°/20° 240° 250° .570” 100.0° 107.5° 187” .179”

10-5168

$569.00

10-5179

$837.00

10-5248

$569.00

10-5268

$868.00 585G3 20°/40° 60°/20° 245° 260° 585” 102.5° 110.0° .186” 176”

10-5170

$569.00

10-5180

$837.00

10-5249

$569.00

10-5269

$868.00 625G4 20°/55° 60°/20° 255° 260° .625” 107.5° 110.0° .189” .184”

10-5172

$569.00

10-5181

$520.00

10-5250

$569.00

10-5270

$868.00 640G5 25°/60° 60°/25° 265° 265° .640” 107.5° 107.5° 228” .221”

10-4276

$341.00 -  

10-4268

$338.00 -   Outer cam drive gear kit

10-4275

$551.00 -  

10-4285

$551.00 -   complete gear drive kit includes pinion gear, front and rear inner cam gears and outer
cam gear.

11-7715

$257.00 adjustable pushrod set

11-2077

$188.00 valve spring kit w/steel top collars

11-2078

N/A valve spring kit with titanium top collars
29
1. Camshaft Set 510G: designed for 88-95 cubic inch engines with compression ratio below 9.7:1
2. Camshaft Set 570G: designed for 88-95 cubic inch engines with compression ratio below 10:1
3. Camshaft Set 585G: designed for 88-95 cubic inch engines with compression ratios from 10 to 10.75:1
4. Camshaft Set 625G: designed for engines of 95 cubic inches or more with compression ratios between 10.0 and 10.75:1
5. Camshaft 640G: designed for engines of 95 cubic inches or more with compression ratios of 10.5-11.5:1
11-7715 S&S TC-88 Adjustable Pushrods and Cover Kit. Chrome-moly pushrods feature simple trouble-free installation that does not require the removal of gas tank or rocker assemblies. Includes pushrods, gaskets, O-rings, retainer clips and upper pushrod covers that have been designed to provide a more stable and rigid cover assembly. 12-0125 Cam Installation Support Kit includes cam cover gasket, two inner cam needle bearings, two outer cam bearings and a retaining ring.
VT No. Price Type Years

12-0125

$70.00 Gear 2000-05 Dyna, 2000-06 Big Twins

12-0126

$130.00 Chain As Above

12-5240

$72.00 Gear 2006-up Dyna, 2007-up Big Twins
 
VT No. Price Item

11-7715

$257.00 Kit

11-7716

$155.00 Pushrods Only
Crane TC-88 Time Saver Adjustable Pushrod Set made from 7/16" diameter chromemoly tubing which eliminates pushrod flex. Adjusts from 8.750" to 10.750".
VT No. Price

7132-99

$193.00
11-7716
7132-99
For TC-88
Crane Cam Sets are available as a replacement style to be used with stock cam drive assembly or with S&S gear drive assembly. Computer
designed hydraulic cams that feature lube-to-lube cam profile accuracy for off idle torque to high RPM horsepower.
99-05 Dyna
99-06 FLT,
FXST
Price 06-up Dyna
07-up FLT,
FXST
Price Duration
@.053
Open/Close
Intake
   
Exhaust
Gross
Valve Lift
@ TDC
Intake
   
Exhaust
  
Specifications

10-4396

$216.00

10-4417

$216.00 226°
236°
.505” .505” Mild Street, Cruising,Touring. Bolt-in cam, low-end torque and mid-range HP. Good for heavy bikes. Stock comp. ratio. Best power w/performance air cleaner, free-flow exhaust. Use stock v/springs. Range: Idle to 5,000 RPM

10-4411**

$286.00 13/33 42/14 .147” 152”

10-4392

$357.00

10-4418

$216.00 236° 242° .505 .505 Moderate Street, Cruising. Bolt in. Mild perf. for Dynas, Softails or single riders. Stock comp. ratio or up to 9.5:1. Best power w/perf. air cleaner and free-flow exhaust. Uses stock v/springs. Range: 1,500 to 5,500 RPM

10-4407*

$272.00 20/36 47/15 .185” .157”

10-4412**

$306.00        

10-4393

$216.00

10-4419

$216.00 242° 252° .505 .505 Street Performance, Some Engine Modifications. Bolt-In. OK w/stock comp. but works best with up to 10:1:1 c/r. Best power w/perf. air cleaner and free-flow exhaust. Use stock v/springs. Range: 1,800 to 5,800 RPM

10-4408*

N/A 19/43 48/24 .178” .205”

10-4413**

$286.00        

10-4394

$216.00

10-4420

$216.00 240° 248° .570” .570” Hot Street Performance, Modified. OK w/stock cubic inch or big-bore kit (95 c.i.). Best power w/incr. comp. ratio 9.5:1-up, head mods. Must use Crane v/springs, clearanced for .570” lift.Great low-end and mid-range torque w/added upper RPM power. Must use perf. air cleaner and free-flow exhaust. Range 1,800 to 5,800 RPM

10-4409*

$272.00 18/42 46/22 .173” 198”

10-4414**

$286.00        

10-4397

$216.00

10-4421

$216.00 246° 254° .619” .619” Hot Street Performance, Modified. For modified engines with 10.25:1-up compression, big bore kits, head mods. Must use Crane valve springs, clearanced for .600” lift. Must use perf. air cleaner and exhaust. Designed to use with Edelbrock Performer RPM Twin-Cam cylinder heads. Range: 2,000 to 6,000 RPM

10-4410*

$272.00 20/46 52/22 .188” .193”

10-4415**

$216.00        

10-4395

$189.00

10-4422

$216.00 254° 260° .600” .600” Max Hot Street, Modified. For modified engines. Higher comp., 10.5:1-up big-bore kits, head mods, etc. Must use Crane v/springs., clearanced for .600” lift. Strong mid-range torque with upper RPM power. Must use perf. air cleaner and free flow exhaust. Range: 2,000 to 6,200RPM

10-4416**

$306.00 25/49 56/24 .211” .206”
*Note: Use S&S Gear Drive Assembly 10-4275
**Note: Cam and lifter kits include replacement style cams and Crane Performance lifters.
 

PRIVACY AND POLICIES

HTML content Copyright ©2012 Mas Classics-Vintage American Motorcycle Parts All rights reserved www.masclassics.com JPG images Copyright ©2010 by Tedd Cycle, Incorporated. All rights reserved. No part of this publication may be reproduced without prior written permission of the publisher.V-Twin MFG. Brand Products - Tedd Cycle Inc, Box 473 Vails Gate, NY 12584