10-4014,10-4025,10-4045
XLH-XLCH Cams
10-4080,10-8123,10-8165
HIGH PERFORMANCE AND DRAGSTER CAMS
VT No Price Year Grind Timing Duration
@ .053
Duration
@ .020
Max
Lift
TDC
Lift
Fits
10-4010
$225.00 1957-70 P 34/40 254 294 .400 .200 4/1 Kit consists of exhaust cams only for use
10-4014
$215.00 1971-80 PB+4/1 43/31 254 298 .410 .192 with Stock P intakes. Bolt-in power for
10-4020*
$215.00 1981-84 PB+4/1 Sportsters with no head work, 2 piece set.
10-4025
$207.00 1984-85 w/alternator
10-4040
$420.00 1957-70 PB+ 34/40 254 298 .410 .208 Fits Sportster with P or Q cams, bolt-in more
10-4045
$404.00 1971-80 43/31 254 298 .410 .208 power with great street grind. No head work
10-4050*
$398.00 1981-84 needed, more power through RPM range with
10-4055
$398.00 1984-85 w/alternator stock springs. To 7000 RPM.
10-4075
$420.00 1957-70 Y 35/47 262 310 .425 .206 Street 900/1000 Biggest cam available for no
10-4080
$404.00 1971-80 53/29 262 310 .425 .182 head work installation. Some 1982 engines
10-4085*
$398.00 1981-84 may require spring spacing. Stock springs are
10-4090
$398.00 1984-85 w/alternator OK. Great mid and upper end power.
10-4105
$420.00 1957-70 R5 33/41 254 306 .445 .209 Street Drags modified 900/1000 motors and
10-4110
$404.00 1971-80 43/31 254 306 .445 .200 small strokers. Big boost in torque over stockf
10-4115*
$398.00 1981-84 cams (2000/7500 RPM). Stock springs are OK,
10-4120
$398.00 1984-85 w/alternator but head set up required.
10-4135
$420.00 1957-70 X 35/55 270 314 .450 .210 Street Drags for stroker motors to 76". More
10-4140
$404.00 1971-80 57/33 270 314 .450 .206 mid range and upper end power. Lower lift
10-4145*
$398.00 1981-84 results in easier installation in 1977 and later
10-4150
$398.00 1984-85 w/alternator engines with extended pinion bearing housing.
Stock springs recommended.
Note: 1981-84 Cam Gear Kit differs from 1971-80 only on the #4 Cam which does not have a tachometer drive gear. Tachometer Gear 25517-71 is available separately as VT No. 12-1400
1986-up 883-1100-1200 XL ENGINE CAM KITS
- - Stock 02/41 223 270 .458 .094 Listed for comparison
41/02 223 270 .458 .094 Note: 1985-87 exhaust cam lift is .414
10-8120
$319.00 1986-90 V2 16/44 240 290 .465 .180 Bolt-in cams for Stock 883, 1100 or 1200. More
10-8125
$319.00 1991-99 N2 46/18 244 290 .440 .155 duration and lift means extra power thru RPM
10-8122
$319.00 2000-up range. Stock springs & hydraulic lifters
recommended. 2000 to 6000 RPM.
10-8140
$319.00 1986-90 V4 30/46 256 296 .490 .216 Street/Drags: Stock or modified 883/1100/1200.
10-8145
$319.00 1991-99 N4 52/24 256 296 .490 .189 Slightly higher idle speed but stock springs and
10-8123
$319.00 2000-up hydraulic lifters recommended.
RPM range: 2500 to 6500.
10-8180
$319.00 1986-90 V8 32/44 256 296 .490 .226 Modified 1100-1200, stroked 883's with stock
10-8185
$319.00 1991-99 N8 56/28 264 302 .500 .212 springs and hydraulic lifters. Great mid-range
10-8124
$319.00 2000-up power: 2000-6000 RPM.
10-8160
$319.00 1986-90 V6 34/50 264 302 .500 .241 Modified 1200's to 80" and/or high comp.
10-8165
$319.00 1991-99 N6 56/28 264 302 .500 .212 pistons. Same intake as N8 but more exhaust
10-8128
$319.00 2000-up duration. Stock springs and hydraulic lifters
      recommended. RPM range: 2500-6500.
10-0533
Cam Cover for XL's include bushings installed
Chrome Price Polish Price Year Brand
10-0554
$282.00
10-0555
$338.00 1991-2003 VT
10-0533
N/A - 1991-2003 OE
10-0563
$229.00
10-0564
N/A 2004-up VT
43-0450
10-0560 10-0559
43-0457
10-0558
10-0559,10-0558,10-0560,8783-8
Polished Cam Covers include bushings for cams and have
cutout for starter motor.
VT No Price Year
10-0559
$300.00 1971-76
10-0558
$300.00 1977-80
10-0560
$300.00 1981-85
8783-8
$17.00 Screw Set
Chrome Right Side Cam Cover/Sprocket Cover Set for
XL’s includes both pieces with gasket and chrome allen screws
for assembly.
VT No Price Year
43-0450
$398.00 1991-2003
43-0457
$379.00 2004-up
791

PRIVACY AND POLICIES

HTML content Copyright ©2012 Mas Classics-Vintage American Motorcycle Parts All rights reserved www.masclassics.com JPG images Copyright ©2010 by Tedd Cycle, Incorporated. All rights reserved. No part of this publication may be reproduced without prior written permission of the publisher.V-Twin MFG. Brand Products - Tedd Cycle Inc, Box 473 Vails Gate, NY 12584