Rod Clamping Tool allows rod to be held for straightening or to replace wrist pin bushing.95952-33.
VT No. Price
16-0029
$67.00
Lapping Tools
Rod Lapping Tool includes arbor assembly 1.500 lap for 45",Indian, and some case races, 1.625 lap for Big Twin, Sportster and K Model rods.
16-0027,16-0012 16-0029
VT No. Price Item
16-0027
$284.00 Rod Tool
16-0012
$18.00 Spanner Wrench
16-0147
16-0039
16-1835,16-0893
16-1838
16-0119
1958-up Big Twin Case Lap Tool features a lap which is supported on both sides by a pilot on the bushing side & plate which locates on the case pins of the cam cover, by Jims. Order lap & pilot VT No. 16-0881 for 1937-E77 4-spd main race separately.
VT No. Price Item
16-1835
$788.00 BT Case Lap Tool
16-0893
$221.00 Case Lap Head only
16-0881
N/A 4-Speed Trans. Lap & Pilot
16-0892
$93.00 4-Speed Lap Head only
Rod Race Press Tool for easy installation or extraction of rod races makes it easy to support without bending rods for 74's and Sportsters.
VT No. Price Brand
16-0147
$70.00 V-Twin
16-1838
$197.00 Jims
16-0135
16-1850
16-1850
16-0032,16-0026 Replacement Lapheads are sold each. For Eastern tool only.
Laphead Price Pilot# Type Fits
16-0032
$120.00 1 3/4" Motor 1958-up Big Twin
16-0026
$118.00 1 1/2" Motor 40-54 Big Twin
16-0025
$118.00 1 3/8" Motor 54-76 Sportster
55-57 Big Twin
29-73 45"
16-0018
$118.00 1.562" Motor 87-up Sportster
16-0034
$118.00 1.870" Trans. 36-77 Big Twin
16-0024
$118.00 1.300" Trans. Sportste
16-0022
$125.00 1 5/8" Rod Big Twin XL
16-0021
$136.00 1 1/2" Rod 45
Lapping Tools used for precision alignment of engine and transmission shafts. Engine unit replaces 96710-40 to lap right and left crankcase races for oversized bearings. Transmission tool insures proper fitting of oversized rollers with mainshaft races on BT and Sportsters. The dual-purpose "Combo Lap" for both engine and transmission is also available. Rod laps not included.
VT No. Price # Use Model Years
16-0135
$652.00 C Motor Big Twin 1936-up
16-0119
$546.00 B Trans. Big Twin
XL
1936-77
1952-83
16-0039
$865.00 A Combo C & B As Above
16-0012
$18.00 All Spanner Wrench
Shaft Turning Tool fits spline or taper on assembled motor and allows engine to be turned over by " ratchet or impact driver. Sifton unless noted.
VT No. Price Years Type
16-0150
$40.00 1930-54 Big Twin, Taper
16-1850*
$40.00 1955-up Big Twin, Spline
16-1378*
$126.00 2006-up FXD, 07-up FL, FXST
16-1852
$37.00 1957-up XL, Spline
Trans. Lap Head includes pilot. For Eastern tool only.
16-0020,16-0019
16-0668
VT No. Price Size Model
16-0020
$159.00 1.870 BT 74 & 80
16-0019
$159.00 1.300 1957-85 Sportster
16-0666
1955-up Sprocket Shaft Hard Cap protects shaft when using press. By Jims.
VT No. Price
16-0666
$52.00
16-1724,16-1725 16-1724,16-1725
Jims Timken Bearing Race Installer is used to press race in straight in left crank case for 1969-up BT, 1977-up XL's.
VT No. Price
16-0668
$250.00
Lap Head Pilots, sold each. For Eastern tool only.
VT No. Price OEM Type Years
16-1724
$119.00 96727-56 Motor 55-up BT
16-1725
$122.00 96728-56 Motor 54-76 XL
16-1726
$127.00 96715-40 1 Motor 30-54 BT
16-1727
$127.00 96716-40 Motor 55-57 45",
BT
16-1832
$118.00 Motor 87-up XL
Sifton Flywheel Washer Tool will "stake" washers in 1971-up BT.
VT No. Price
16-1785
N/A
16-1785
16-0131
1930-54 BT Flywheel End Play Gauge.
VT No. Price
16-0131
$49.00
1225

PRIVACY AND POLICIES

HTML content Copyright ©2012 Mas Classics-Vintage American Motorcycle Parts All rights reserved www.masclassics.com JPG images Copyright ©2010 by Tedd Cycle, Incorporated. All rights reserved. No part of this publication may be reproduced without prior written permission of the publisher.V-Twin MFG. Brand Products - Tedd Cycle Inc, Box 473 Vails Gate, NY 12584